01
Licensed & Insured Independent Pros
You're connected with insured, independent contractors, licensed where required, who handle the full install.
Answering Calls Around the Clock
Interior Basement Waterproofing in Como, MS
If your Como basement takes on water at the cove joint, one call connects you with a licensed, insured independent pro who manages that water from inside with a proven drainage system.
Call +1-866-476-1348Free referral, 24/7
- Interior French drain systems
- Sump basin, pump and battery backup
- Installed from inside, year-round
- No-cost referral
- Licensed and insured independent pros
- Upfront written pricing
- Phones answered 24/7
The Problem
Why Water Comes In Where the Wall Meets the Floor
Basements go up in separate pours: footing, then walls, then the floor. The seam where the slab meets the wall, called the cove joint, is never truly sealed. It's a cold joint between two separate pours. When groundwater rises around the house, hydrostatic pressure pushes water up through that seam and through the gap between the footing and the slab.
That's the reason seepage so often starts as a dark line along the base of the wall. Sealing the joint from inside rarely works for long, because the pressure behind it doesn't go away. Interior waterproofing takes a different approach: it gives the water a controlled path to a sump pump, so the pressure never builds high enough to push water onto the floor.
It's the go-to fix for most existing basements. It's installed entirely from inside, works in any season and costs considerably less than excavating around the whole house.
- A wet line along the floor edge
- Water rising through floor cracks
- White staining on block
- Plans to finish the space
Details That Make Interior Drainage Last
Most failed interior systems failed because of how they were installed, not because the concept doesn't work. The first is a trench that doesn't go deep enough. The drain tile needs to sit beside the footing, not just under the edge of the slab, or water still finds its way up through the cove joint.
The second is cheap backfill. Drain tile should be bedded in washed, clean stone so water flows freely. Dirty gravel or reused soil clogs the pipe over time. Some systems also use a filter fabric sleeve on the pipe to keep fine silt out.
Third is pitch and layout. The drain tile has to slope toward the sump, and a long basement may need more than one sump or a cleanout port for future flushing. Ask the contractor how many access points the system has.
And last, the pump needs to fit the job. An undersized pump runs constantly and burns out early. An oversized one short-cycles. A contractor who sizes the pump to your actual inflow and lift height, and adds a backup, is building a system meant to last.
Why Choose Us
Why Homeowners Call Us for Interior Basement Waterproofing in Como, MS
Interior systems look simple, but the details decide whether they last.
02
Upfront Flat-Rate Pricing
Expect per-foot drain tile pricing and itemized sump and membrane costs in writing.
03
Fast Local Dispatch
Local scheduling is usually quick, with prompt inspections and short lead times on installs.
04
Specialized Tools & Equipment
Slab saws with dust control, jackhammers, air scrubbers and containment sheeting keep the mess down.
Solutions
What an Interior Waterproofing System Includes
These parts work together as one drainage system.
01
Sub-Slab Drain Tile
Perforated pipe is set in clean stone in a trench beside the footing, then covered with fresh concrete, leaving a drainage gap at the wall.
02
Sump Basin and Pump
All the drain tile feeds a lidded basin, where a properly sized submersible pump discharges the water outside.
03
Dimple Wall Membranes
A dimpled plastic membrane is fastened to the wall and tucked into the drain channel. Seepage through the wall runs down behind it into the drain tile, and the wall stays dry on the room side.
04
Draining Hollow Block Cores
Weep holes at the base of block walls let water trapped in the cores drain into the drain tile.
05
Battery Backup and Alarms
A battery backup pump and a high-water alarm protect the basement when the power goes out or the main pump fails.
06
Discharge Line and Freeze Protection
The discharge pipe carries water well away from the house, with a freeze guard so ice can't back water into the pit.
What Affects the Cost of Interior Waterproofing
Interior drainage is usually priced by the linear foot of drain tile, so the size of the basement and how many walls need treatment set the baseline. A partial run along one wall can cost a fraction of a full perimeter. Foundation type matters next, since block walls need weep holes and poured walls don't. Obstacles add labor: finished walls that must be opened, stairs, built-in shelves, the furnace and water heater sitting close to the wall.
The sump package changes the price as well. A single pump in a new basin is the baseline, a battery backup and alarm add to it, and a basement with heavy inflow may need two pumps or two pits. Wall membranes, dehumidifiers and electrical work for a dedicated pump circuit are often separate lines. Ask the contractor to mark the drain tile route and sump location on a sketch so you can compare quotes on the same layout.
It's also worth asking what happens to the concrete and debris. Breaking out a perimeter strip produces a surprising amount of rubble, and hauling it away should be included in the quote. So should the final floor patch, dust containment and cleanup. If you plan to finish the basement later, mention it at the start, because the contractor may suggest a wall membrane or a slightly different drain layout that makes finishing easier and protects the new walls from day one.
How It Works
How an Interior Waterproofing Call Works
Most interior installs take one to three days. Here's how it goes.
- 1
Call Dispatch
Call +1-866-476-1348 and tell us where and when the water appears and what's along the walls.
- 2
Rapid Mobile Arrival
A nearby contractor sets an inspection time quickly.
- 3
Expert Assessment & Quote
The contractor measures the perimeter, inspects walls and floor, recommends where drain tile and the sump should go and gives you an itemized written quote.
- 4
Resolution & Final Walkthrough
Once approved, the system is installed with dust control, the floor is patched, debris is removed and you get a walkthrough of the pump, alarm and warranty.
Prep tip: move belongings about three feet from the walls and cover anything that has to stay.
Water Coming In at the Floor Joint?
Call now for a free referral to a licensed, insured independent interior waterproofing contractor in Como.
Call +1-866-476-1348Customer Stories
Dry Floors, Finally
Every spring we had a wet line along three walls. They put in drain tile around the whole basement with a sump and battery backup. We made it through the wettest spring in years without a drop.
Mike B., Como
I was dreading the dust, but they set up plastic walls and an air scrubber. Upstairs stayed clean, and they hauled every bit of concrete away.
Linda Q., Como
Our block walls were always damp. They drilled weep holes, put up a membrane and ran drain tile to a new sump. Now we're finally finishing the basement.
Chris N., Como
Two-day job, clear quote, no surprises. The contractor showed me how to test the pump and the backup before he left.
Sofia R., Como
FAQ
Common Interior Basement Waterproofing Questions
How does an interior drainage system work?
Drain tile beside the footing catches water and sends it to a sump pump, which pushes it outside. It relieves the pressure that forces water through the cove joint.
Will the floor look patched afterward?
There will be a strip of new concrete about a foot wide around the perimeter. In finished basements it's usually hidden under flooring and baseboard. In unfinished spaces it's visible but clean.
Do I need to tear out finished walls?
Usually the bottom portion of drywall and framing along the affected walls must be removed so the trench can be dug and the membrane installed. If you want to avoid that entirely, ask about exterior waterproofing.
How loud and messy is the installation?
It's noisy during cutting, but containment keeps dust out of the rest of the house. Most families stay home during the work.
Does an interior system need maintenance?
Minimal. Test the pumps twice a year and keep the discharge outlet clear. Some contractors offer annual service checks.
Can I add interior drainage to just one wall?
Yes, partial runs are common. The contractor will tell you whether a partial run will do the job or just push water to the next wall.
Service Area
Serving Como and Nearby Communities
We connect homeowners throughout Como and nearby towns with independent interior waterproofing contractors who install drain tile and sump systems every week. Poured, block and stone foundations are all covered.
Contractors who work around Como know the local foundation types well and plan each drain tile layout and sump location to match.
See the zip codes and nearby cities below, or call to confirm.
